Road Marking Glass Beads

Road marking glass beads for hot-melt and cold road marking paint. Linghang supplies solid drop-on and premix (intermix) glass beads in mesh 20–100 (850–150 μm), roundness ≥80% and refractive index 1.5 for reflective lane lines, crossings, parking areas and airport markings. Grades can be aligned with AASHTO M247, EN 1423/1424, BS 6088 and GB/T 24722 requirements. Factory-direct packaging, samples and batch specifications available.

Choose a road marking glass bead grade
For surface application to fresh road marking paint, compare 20–40 mesh drop-on glass beads, high-brightness 20–40 mesh glass beads and 20–100 mesh drop-on glass beads. Drop-on beads are surface-applied; premix (intermix) beads are incorporated into the marking material. Specify which application method your project requires before selecting a grade.
Information to include in your inquiry
Send your required grading or mesh range, paint type, application method, required refractive index, project standard, quantity and destination port through the existing inquiry form. Request the specifications and test information for the proposed grade to check against your project requirements; a standard name alone does not confirm that every grade meets every requirement.
For size selection, read the road marking glass bead mesh-size guide and glass bead mesh-to-micron chart. Match the selected size to the marking system and confirm performance by application testing.